1. |
Except for Secondary Suites, each Dwelling that has direct access to ground level shall have an entrance door or entrance feature facing a public roadway, other than a Lane. On Corner Sites, the entrance door or entrance feature may face either the Front Lot Line or the flanking Side Lot Line. |
2. |
When a structure is greater than 7.5 m in Height, the width of any one Dormer shall not exceed 3.6 m. The aggregate total width of one or all Dormers shall not exceed one third of the length of the building’s wall in which the Dormers are located. |
3. |
Development shall incorporate design elements to reduce the perceived mass and add architectural interest, including a prominent front entrance, windows, variation in rooflines, recesses, projections, variation of exterior finishing materials, colours, textures, cladding, and/or varied architectural design. |
4. |
Identical or mirrored front elevations shall not be located on Abutting Sites. Development shall be differentiated through the inclusion of two or more design elements such as a variety of finishing materials, varied roof lines, differences in the design of entry features, or variation in window and door placement. Variations in color do not satisfy this requirement. |
5. |
The façades of a principal building Abutting the Front Lot Line and the flanking Side Lot Line shall use consistent building materials and architectural features, and shall include features such as windows, doors, or porches. |
6. |
Basement elevations shall be no more than 1.5 m above Grade. The Basement elevation shall be measured as the distance between Grade and the finished floor of the first Storey. |
7. |
Where an interior Side Setback is less than 2.0 m, |
|
a. |
the applicant shall provide information regarding the location of side windows of the Dwellings on the Abutting properties and Amenity Areas on Abutting properties; |
b. |
the side windows of the proposed Dwelling shall be located to reduce overlook into Amenity Areas of the Abutting properties; and |
c. |
the proposed Dwelling shall incorporate design techniques, such as, but not limited to, translucent window treatment, window location, raised windows, or Privacy Screening, to reduce direct line of sight into the windows of the Dwelling on the Abutting property. |
|
8. |
Platform Structures located within a Yard or Yard abutting Single Detached Housing, and greater than 1.0 m above the finished ground level, excluding any artificial embankment, shall provide Privacy Screening to prevent visual intrusion into Abutting properties. |
9. |
Notwithstanding Section 44.1(a), projections shall not exceed 0.5 m into the required setback abutting 134 Street NW and 0.4 m into the required setback abutting 103 Avenue. |
10. |
Attached Garages shall be developed in accordance with the following: |
|
a. |
Within the proposed north Lot, a maximum width of 4.0 m for an attached garage shall be permitted; and |
b. |
Building mass shall be articulated through features such as recess or off-sets, architectural treatments, and Landscaping. |
c. |
Attached Garages shall not be permitted for the proposed south Lot nor the development of the Site as a Single Lot. |
|