1.1. |
Words that are capitalized in this Bylaw refer to: |
|
|
1.2. |
Words that are not capitalized should be given their plain and ordinary meaning as the context requires. |
1.3. |
When a word or expression is defined in this Bylaw, other parts of speech and grammatical forms of the same word or expression have corresponding meanings. |
General Reference Regulations
|
1.4. |
Zone is to be interpreted as the same as District and a Rezoning Amendment is to be interpreted as the same as a Redistricting Amendment. |
1.5. |
Direct Control Provision is to be interpreted as the same as Direct Control Zone. |
1.6. |
“Section” in this Bylaw means a reference to a contained set of regulations within a Part of this Bylaw. |
1.7. |
“Subsection” in this Bylaw means a reference to a specific regulation or set of regulations within a Section. |
1.8. |
A reference to: |
|
1.8.1. |
“commercial building” means a building containing 1 or more Commercial Uses and not containing any Residential Uses; |
1.8.2. |
“commercial Zone” means a Zone where the Purpose is to primarily enable Commercial Uses; |
1.8.3. |
“industrial building” means a building containing 1 or more Industrial Uses; |
1.8.4. |
"industrial Zone” means a Zone where the Purpose is to primarily enable Industrial Uses; |
1.8.5. |
“mixed use building” means a building containing a mix of 1 or more non-Residential Uses with 1 or more Residential Uses; |
1.8.6. |
“mixed use Zone” means a Zone where the Purpose is to primarily enable a mix of non-Residential Uses and Residential Uses; |
1.8.7. |
“non-residential building” means a building, other than a mixed use building, containing 1 or more non-Residential Uses; |
1.8.8. |
“non-residential Zone” means a Zone other than a residential Zone; |
1.8.9. |
“residential building” means a building containing 1 or more Residential Uses. A residential building includes a mixed-use building; |
1.8.10. |
“residential Zone” means a Zone where the Purpose is to primarily enable Residential Uses; and |
1.8.11. |
a Use that is “existing as of January 1, 2024” means that the Use is existing with a valid Development Permit as of January 1, 2024. |
|
1.9. |
A Residential Use may be arranged in any housing arrangement except as otherwise restricted by the definition of that housing arrangement or by a regulation in this Bylaw. |
1.10. |
Any development regulation that regulates a principal building and depends on the context of 1 or more Abutting properties or road rights-of-way must only be applied to the Development Permit application for the construction of a principal building and does not apply to future Development Permit applications on that Site unless such applications result in the construction of a new principal building or an expansion of the building envelope of an existing principal building. |
1.11. |
Despite any other regulation of this Bylaw or any other Bylaw passed by Council to the contrary, headings and titles within this Bylaw are deemed to form a part of the text of this Bylaw. |
Interpreting Conflicts
|
1.12. |
In the case of any conflict between the text of this Bylaw and any maps, photos, diagrams, or drawings used to illustrate any aspect of this Bylaw (including Section 1.20, Zoning Map), the text takes precedence. |
1.13. |
In the case of any conflict between a number written in numerals and a number written in letters, the number written in numerals must govern. |
1.14. |
In the case of any conflict between information expressed in metric units and in imperial units, the metric must govern. |
1.15. |
Where a regulation references a City department that no longer exists, it must be interpreted as the department that is most appropriate. |
Rounding Numbers
|
1.16 |
Unless specified elsewhere in this Bylaw, units must be rounded to the tenth decimal place. # |
1.17. |
Where a calculation to determine any of the following results in a number with a tenth decimal place of 0.5 or greater, the value must be rounded up to the next whole number: |
|
|
1.18. |
Despite Subsection 1.17, where a calculation specified in Subsection 1.17 results in a number less than 1.0, the value must be rounded to 1.0. |